Biesse edge bander service and repair
I was factory-trained by Biesse in Pesaro, Italy, and I service Biesse edge banders on site across Metro Vancouver and British Columbia — electrical and control faults, electronic boards, glue units, trimming and set-up. I also work on Biesse CNC machining centres.
Factory-trained by Biesse
Biesse edge banders such as the Akron series are a common sight in cabinet shops around Vancouver. I have serviced them from the control panel to the trimming units, along with Biesse CNC machining centres.
When a Biesse machine stops or the edge quality drops, I start with the error and the machine’s documentation, find the real cause and set the machine up properly for your material.
- Biesse Akron 1330 A
- Biesse Akron 855
- Biesse Spark 4.8
- Biesse CNC machining centres
Service for the whole machine
Electrical & control systems →
Control faults, drives, sensors and safety circuits.
Electronic board repair →
Board-level repair of panels and boards.
Mechanical & pneumatic systems →
Glue units, pressure, trimming and scraping set up for a clean edge.
Maintenance & installation →
Preventive maintenance, calibration and set-up.
From recent service visits
Frequently asked
Do you work on Biesse CNC machines too?
Yes. Besides edge banders, I service Biesse CNC machining centres. Call with the model and the problem.
Are you a Biesse dealer?
No. I am an independent technician, factory-trained by Biesse, and I service the machines directly at your shop.
What should I send before the visit?
A photo of the name plate, the error message on the screen and a short video of the problem.
Machine down? Get in touch.
Call or text with the machine brand and model and what it is doing. A photo of the name plate and a short video of the fault help a lot. Monday to Friday 8:00 am – 6:00 pm, Saturday 9:00 am – 2:00 pm.
On site across Vancouver, Burnaby, Richmond, New Westminster, Coquitlam, Surrey, Delta, Langley and Abbotsford — and across British Columbia by arrangement. Farsi-speaking clients are welcome.